Registering custom wb, Capture and register the image, I ^ seiect [custom wb regist – Canon EOS-1D Mark IV User Manual
Page 73: I ^ seiect the custom wb no. to be registered, Seiect [record and register image, Custom white balance
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Custom White Balance
Custom white balance enables you to manually set the white balance
for a specific light source for better accuracy. Up to five Custom white
balance data can be registered to the camera. You can also append a
name (caption) to the registered Custom white balance data.
Registering Custom WB
There are two ways to register Custom white balance data. You can
either take a picture and register it, or register an image already saved
in the card.
Capture and register the image
I
^
Seiect [Custom WB regist.].
I • Under the [Q'] tab, select [Custom
WB regist], then press <©>.
I ^ Seiect the Custom WB No. to be
registered.
• Press <©>.
• Turn the <0> dial to select 1 to 5 for
Custom WB data will be registered
under the selected No.
Seiect [Record and register
image].
• Turn the <0> dial to select [Record
and register image], then press
<
0
>,
► The LCD monitor will turn off, and the
selected No. [ * ] will blink on the rear
LCD panel.
73
Vr5 r*gist
Ftegster ifnagt card
Record and reolster
Edit cdEibon
set ii nhile balance
r