Charging the battery, 1 connect the charger to a power outlet, Recharge the battery – Canon EOS-1D Mark IV User Manual

Page 28

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Charging the Battery

<1 Connect the charger to a power

outlet.

• Connect the power plug to a power

outlet, and connect the power cord to

the charger.

• When no battery Is attached, all the

Indicator lamps will be off.

Remove the protective covers

from the charger and battery.

• Remove the protective cover on the

charger by sliding it out.

Recharge the battery.

• Slide the battery into the charger's

slot as shown by the arrow, and make
sure it is securely attached.

« You can attach the battery to slot A or B.

► The battery will start recharging and

the green status lamp will blink.

► When the battery is fully charged, all

three Charge level Indicators will light

(50%/80%/100%).

• It takes approx. 2 hours to fully recharge

a completely exhausted battery.

• The time required to recharge the battery

depends on the ambient temperature
and battery's charge level.