Shooting function settings – Canon EOS-1D Mark IV User Manual
Page 150
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
' Shooting Movies
Q • For continuous shooting of stili photos during movie shooting, using a
high-speed CF card compatible with UDMA transfers is recommended.
Setting a smaller image size for still photos and shooting fewer
continuous still photos are also recommended.
• If the drive mode has been set to < (S)™ > or < (<)
2
> and you start shooting
a movie, the drive mode will automatically change to <□> (single
shooting).
Shooting Function Settings ■■■■■■■■■■■■■■■
As with normal shooting through the viewfinder, during movie shooting,
you can stiil use the camera buttons to change function settings and
execute piayback.
• Pressing the
<0> or
button will display the
respective setting screen on the LCD
monitor. To change the setting, turn the
<£Sl> or <0> diai.
When you press the
card to be used to record and turn the <0> dial to set the image
size or white balance while looking at the rear LCD panei.
The metering mode wiil be fixed to center-weighted average
metering for movie shooting. If the AF mode is set to ['i' (Face
detection) Live mode], the exposure controi wiii be evaluative
metering linked to the detected face.
Even if the AF mode has been set to [Quick mode], it wiil switch to
[Live mode] during movie shooting.
150