Dell Brocade Adapters - Manual (Page 112)

88 Brocade Adapters Troubleshooting Guide
53-1002145-01
Statistics
3
Displaying virtual port statistics through HCM
Display statistics by selecting Monitor > Statistics > Virtual Port Statistics.
OR
Right-click a virtual port on the device tree and select Virtual Port Statistics.
Displaying virtual port statistics through BCU
Use the vport --stats command to display statistics.
vport --stats
where:
port_id ID of the port for which you want to display virtual rport statistics. This could
be the PWWN, port hardware path, or user-specified port name. This could
also be the adapter-index/port-index. For example, to specify adapter 1, port
1 you would use 1/1 as the port identification.
vpwwn Displays the statistics for the virtual port by its WWN. If no PWWN is specified,
the information provided is for the base vport.
VLAN statistics for a team (CNA and NIC)
Use HCM and BCU to display VLAN statistics for a team that use CNA ports or Fabric Adapter ports
configured in CNA or NIC mode. VLAN statistics related to a specific team can include VLAN ID,
VLAN name, number of transmit and receive bytes, length of time between byte transmission and
reception, and correction status. You can also use options to set the polling frequency, start polling,
and reset statistics.
Displaying VLAN statistics through HCM
VLAN statistics for a team can only be opened if the VLANs are added to a team from the Teaming
Configuration dialog box.
To display the VLAN Statistics dialog box for a team, use the following steps.
1. From the Ethernet port level, select an Ethernet port from the device tree.
2. Click Statistics on the Teaming Configuration dialog box.
The VLAN Statistics dialog box displays.
Displaying VLAN statistics through BCU
Use the team --vlanquery command to display VLAN statistics for a team (Windows systems only).
team --vlanquery
where:
vlan_id Specifies the VLAN identifier. The range for the VLAN ID is 1 to 4094.