Dell Brocade Adapters - Manual (Page 148)

124 Brocade Adapters Troubleshooting Guide
53-1002145-01
Adapter driver event messages
A
Remote port (WWN = [remote port
WWN]) offlined by logical port (WWN
= [logical port WWN]). Information Storage driver 4 (RPORT) Offline Login nexus with
remote port
terminated by
logical port. No action
required.
Remote port (WWN = [remote port
WWN]) connectivity lost for logical
port (WWN = [logical port WWN]). Error Storage driver 4 (RPORT) Offline Login nexus with
remote port is lost. Check if remote
port is having
issues.
Target (WWN = [Target WWN]) is
online for initiator (WWN = [Initiator
WWN]). Information Storage driver 5 (ITNIM) Online SCSI IT-Nexus
established
between initiator
and target. No action
required.
Target (WWN = [Target WWN])
offlined by initiator (WWN = [Initiator
WWN]). Information Storage driver 5 (ITNIM) Offline SCSI IT-Nexus
terminated by
Initiator. No action
required.
Target (WWN = [Target WWN])
connectivity lost for initiator (WWN =
[Initiator WWN]). Error Storage driver 5 (ITNIM) Offline SCSI IT-Nexus
terminated between
initiator and target. No action
required.
Virtual port deleted using proprietary
interface: WWN = [logical port WWN],
Role: [initiator, target, IPFC mode
etc.]. Information Storage driver 3 (LPORT) Deleted Virtual port deleted. No action
required.
Virtual port deleted using standard
interface: WWN = [logical port WWN],
Role: [initiator, target, IPFC mode
etc.]. Information Storage driver 3 (LPORT) Deleted Virtual port deleted. No action
required.
Virtual port login failed. Duplicate
WWN = [logical port WWN] reported
by fabric. Warning Storage driver 3 (LPORT) Failed Duplicate WWN
reported by fabric. Delete this vport
and create with a
different WWN.
Virtual port (WWN = [logical port
WWN]) login failed. Max NPIV ports
already exist in fabric/fport. Warning Storage driver 3 (LPORT) Failed Max NPIV ports
already exist in
fabric/fport. Check fabric and
fport
configuration
Virtual port (WWN = %s) login failed. Warning Storage driver 3 (LPORT) Failed Unknown error. Check
fabric/fport
configuration.
Network and Storage Driver Events
Adapter removed: SN = [adapter
serial number]. Warning Network and
storage driver 1
(Adapter) Removed Adapter removed. Check PCIe
connector and
configuration.
Authentication successful for base
port: WWN = [base port WWN or
MAC]. Information Network and
storage driver 2 (Port) Successful Authentication
successful. No action
required.
TABLE 13 Driver event messages (continued)
Message Severity Event Type Category Sub
Category Cause Action