Dell Brocade Adapters - Manual (Page 147)

Brocade Adapters Troubleshooting Guide 123
53-1002145-01
Adapter driver event messages
A
Base port link is disabled: Hardware
Address = [Base port MAC]. Warning Network driver 10
(EthPort) Disabled Ethernet port
disabled by the
user. No action
required.
Storage Driver Events
Authentication enabled for base port:
WWN = [Base port WWN]. Information Storage driver 8 (AUDIT) Enabled Authentication
enabled by user
command. No action
required.
Authentication disabled for base
port: WWN = [Base port WWN]. Information Storage driver 8 (AUDIT) Disabled Authentication
disabled by user
command. No action
required.
Fabric name changed for base port:
WWN = [Base port WWN]. Warning Storage driver 2 (PORT) Changed Fabric name
changed for base
port. No action
required.
Logical port WWN: [logical port
WWN], Role: [initiator, target, IPFC
mode etc.] is deleted. Information Storage driver 3 (LPORT) Deleted Logical port
deleted. No action
required.
Logical port online: WWN = [logical
port WWN], Role: [initiator, target,
IPFC mode etc.]. Information Storage driver 3 (LPORT) Online Logical port (base
or logical) logged
into fabric. No action
required.
Logical port taken offline: WWN =
WWN = [logical port WWN], Role:
[initiator, target, IPFC mode etc.]. Information Storage driver 3 (LPORT) Offline Logical port (base
or logical) logged
out of fabric. No action
required.
Logical port lost fabric connectivity:
WWN = [logical port WWN], Role:
[initiator, target, IPFC mode etc.]. Error Storage driver 3 (LPORT) Offline Logical port (base
or logical) lost fabric
connectivity. Check switch and
adapter
configuration.
New logical port created: WWN =
[logical port WWN], Role = [initiator,
target, IPFC mode etc.]. Information Storage driver 3 (LPORT) Created New logical port
created. No action
required.
New virtual port created using
proprietary interface: WWN = [logical
port WWN], Role: [initiator, target,
IPFC mode etc.]. Information Storage driver 3 (LPORT) Created. New virtual port
created. No action
required.
New virtual port created using
standard interface: WWN = [logical
port WWN], Role: [initiator, target,
IPFC mode etc.]. Information Storage driver 3 (LPORT) Created New virtual port
created. No action
required.
QOS priority changed to [New QOS
flow ID]: RPWWN = [Remote port
WWN] and LPWWN = [Logical port
WWN]. Information Storage driver 4 (RPORT) Changed QOS priority
changed. No action
required.
QOS flow ID changed to [New QOS
flow ID]: RPWWN = [Remote port
WWN] and LPWWN = [Logical port
WWN]. Information Storage driver 4 (RPORT) Changed QOS flow ID
changed. No action
required.
Remote port (WWN = [remote port
WWN] online for logical port (WWN =
[logical port WWN]). Information Storage driver 4 (RPORT) Online Login nexus
established with
remote port. No action
required.
TABLE 13 Driver event messages (continued)
Message Severity Event Type Category Sub
Category Cause Action