Dell Brocade Adapters - Manual (Page 150)

126 Brocade Adapters Troubleshooting Guide
53-1002145-01
Adapter driver event messages
A
SFP removed: port [base port
number], Hardware Address = [base
port WWN or MAC]. Warning Network and
storage driver
(stand-up
adapters only)
2 (Port) Removed SFP removed. Check if SFP is
inserted properly.
SFP POM level to [aggregated SFP
temperature, voltage, rx and tx power
level]: port [base port number],
Hardware Address = [base port WWN
or MAC]. Warning Network and
storage driver
(stand-up
adapters only)
2 (Port) Unhealthy Change of current
value against
threshold of
temperature,
voltage and rx/tx
power of SFP.
Pluggable optical
module (POM) plugs
into the SFP. If POM level is not
normal, check the
SFP.
Network Intermediate Driver Events
VLAN id = # added/enabled on port
mac = # Information Intermediate
driver VLAN New VLAN created. No action
required.
New VLAN id = # removed/disabled
from port mac = #. Warning Intermediate
driver VLAN Existing VLAN
deleted. No action
required.
New VLAN id = # added/enabled on
mac = # Information Intermediate
driver VLAN Team New team VLAN
created.
No action
required.
New VLAN id = # removed/disabled
from mac = #. Warning Intermediate
driver VLAN Team Existing team VLAN
deleted. No action
required.
New team mac =# created/enabled. Information Intermediate
driver Team New team created. No action
required.
Team mac = # deleted/disabled. Warning Intermediate
driver Team Existing team
deleted. No action
required.
A port is added to team mac = #. Information Intermediate
driver Team An Ethernet port is
added to an existing
team. No action
required.
A port is removed from team mac =
#. Warning Intermediate
driver Team An Ethernet port is
removed from an
existing team No action
required.
Active port has changed in team mac
= # Information Intermediate
driver Team An ethernet port
has become
primary in the team. No action
required.
TABLE 13 Driver event messages (continued)
Message Severity Event Type Category Sub
Category Cause Action