Dell Brocade Adapters - Manual (Page 135)

Brocade Adapters Troubleshooting Guide 111
53-1002145-01
Adapter queries
3
Adapter queries
Use BCU commands to list and query available adapters seen by the driver.
The bcu adapter --list command lists all adapters on the system with a brief summary of
information such as model number, serial number, and adapter number. Enter the following
command:
adapter --list
where:
list Lists all adapters in the system. For each adapter in the system, a brief
information line displays containing the adapter type, model number, serial
number, and hardware path.
The adapter --query command displays adapter information, such as the current version of the
adapter, adapter type, adapter (chip revision) and driver (fw version), maximum port speed, model
information, serial number, number of ports, PCIe information, pwwn, nwwn, hardware path, flash
information (such as firmware version), BIOS version, EFI version, current power mode, and port
information (PWWN, NWWN, beacon status).
adapter –-query
where:
ad_id ID of the adapter for which you want to query.