Dell Brocade Adapters - Manual (Page 99)

Brocade Adapters Troubleshooting Guide 75
53-1002145-01
Statistics
3
Displaying statistics through BCU
Use the following BCU command to display DCB statistics.
bcu dcb --stats
where:
The ID of the Ethernet port. This could be the PWWN, port hardware path, or
user-specified port name. This could also be the adapter-index/port-index.
For example, to specify adapter 1, port 1 you would use 1/1 as the port
identification.
Displaying statistics through HCM
Display the DCB Statistics dialog box using the following steps.
1. From the device tree, select a physical port of a CNA or Fabric Adapter ports configured in CNA
mode.
2. Select Monitor > Statistics > DCB Statistics.
DCB query (CNA only)
Use this query for CNAs or to Fabric Adapter ports configured in CNA mode only. Query the DCB
information on a selected port and display such information as LLDP attributes and the DCB group
map priority tables.
bcu dcb --query
where:
The ID of the Ethernet port. This could be the PWWN, port hardware path, or
user-specified port name. This could also be the adapter-index/port-index.
For example, to specify adapter 1, port 1 you would use 1/1 as the port
identification.
FCoE statistics (CNA)
These statistics are available on CNAs and on Fabric Adapters configured in CNA mode. Use BCU
and HCM to display statistical information related to a selected Fibre Channel over Ethernet (FCoE)
port. Statistics include the number of transmitted and received packets and transmitted and
received bytes. You can also select options to continue running data, configure polling frequency,
and start polling.