Removing host access – Dell POWERVAULT MD3620I User Manual
Page 102
102
Configuration: About Your Host
The Specify Host Type window is displayed.
7 In Host type, select the relevant operating system for the host.
The
Host Group Question window is displayed.
8 In this window, you can select:
•
Yes—this host shares access to the same virtual disks with other hosts.
•
No—this host does NOT share access to the same virtual disks with
other hosts.
9 Click Next.
If you select
Yes, the Specify Host Group window is displayed. If you
select
10 Enter the name of the host group or select an existing host group and click
Next.
The
Preview window is displayed.
11 Click Finish.
Removing Host Access
To remove host access:
1 In the AMW, select the Mappings tab, select the host node in the
Topology pane.
2 Perform one of these actions:
• Select
Mappings Remove.
• Right-click the host node and select Remove from the pop-up menu.
The
Remove confirmation dialog is displayed.
3 Type yes.
4 Click OK.
For more information, see the PowerVault Modular Disk Storage Manager
online help topics.
book.book Page 102 Tuesday, June 18, 2013 3:09 PM