beautypg.com

Dell POWERVAULT MD3620I User Manual

Page 95

background image

Configuration: Using iSCSI

95

Viewing iSCSI Statistics and Setting Baseline

Statistics

To view iSCSI statistics and set baseline statistics:

1 In the AMW toolbar, select Storage Array iSCSIStatistics.

The

View iSCSI Statistics window is displayed.

2 Select the iSCSI statistic type you want to view in the iSCSI Statistics

Type area. You can select:

Ethernet MAC statistics

Ethernet TCP/IP statistics
Target (protocol) statistics

3 In the Options area, select:

Raw statistics—To view the raw statistics. Raw statistics are all the

statistics that are gathered since the RAID controller modules were

powered on.

Baseline statistics—To view the baseline statistics. Baseline statistics

are point-in-time statistics that are gathered since you set the baseline

time.

After you select the statistics type and either raw or baseline statistics, the

details of the statistics are displayed in the statistics tables.

NOTE:

You can click Save As to save the statistics that you are viewing in a

text file.

4 To set the baseline for the statistics:

a

Select Baseline statistics.

b

Click Set Baseline.

c

Confirm that you want to set the baseline statistics in the dialog that

is displayed.

The baseline time shows the latest time you set the baseline. The sampling

interval is the difference in time from when you set the baseline until you

launch the dialog or click

Refresh.

NOTE:

You must first set a baseline before you can compare baseline

statistics.

book.book Page 95 Tuesday, June 18, 2013 3:09 PM

This manual is related to the following products: