beautypg.com

Re-copying the virtual disk – Dell POWERVAULT MD3620I User Manual

Page 191

background image

Configuration: Premium Feature—Virtual Disk Copy

191

4 Remove the drive letter(s) of the source and (if mounted) virtual disk in

Windows or unmount the virtual drive(s) in Linux to help guarantee a

stable copy of the drive for the virtual disk. If this is not done, the copy

operation reports that it has completed successfully, but the copied data is

not updated properly.

5 Follow any additional instructions for your operating system. Failure to

follow these additional instructions can create unusable virtual disk copies.

NOTE:

If your operating system requires additional instructions, you can find

those instructions in your operating system documentation.

Re-Copying the Virtual Disk

You can use the Copy Manager to create a new virtual disk copy for a selected

source virtual disk and a target virtual disk. Use this option when you have

stopped a virtual disk copy and want to start it again or when a virtual disk

copy has failed or completed. The virtual disk copy starts over from the

beginning.

• Possible loss of data—The re-copying operation overwrites existing data on

the target virtual disk.

• Possible loss of data access—While a virtual disk copy has a status of In

Progress or Pending, source virtual disks are available for read I/O activity

only. Write requests are allowed after the virtual disk copy has completed.

Keep these guidelines in mind when re-copying a virtual disk:

• If hosts are mapped to the source virtual disk, the data that is copied to the

target virtual disk when you perform the re-copy operation may have

changed since the previous virtual disk copy was created.

• Select only one virtual disk copy in the

Copy Manager dialog.

To re-copy the virtual disk:

1 Stop all I/O to the source virtual disk and the target virtual disk.
2 Unmount any file systems on the source virtual disk and the target virtual

disk.

3 In the AMW, select Virtual Disk Copy Manager.

The

Copy Manager window is displayed.

4 Select the copy pair in the table.

book.book Page 191 Tuesday, June 18, 2013 3:09 PM

This manual is related to the following products: