Dell POWERVAULT MD3620I - Manual (Page 213)

Management: Firmware Downloads 211
Downloading Only NVSRAM Firmware
Use the command line interface (CLI) to download and activate NVSRAM to
several storage arrays. For more information, see the PowerVault Modular Disk
Storage Manager online help topics.
To download only NVSRAM firmware:
1 To download the NVSRAM firmware from:
• EMW—Go to step 7.
• AMW—Go to step 2.
2 Select Advanced Maintenance Download RAID Controller
Module NVSRAM
or
Select the Support tab, and click Download Firmware. In Select download
task, select Download RAID controller module NVSRAM and click OK.
An error message is displayed. Click
OK to close it and select a compatible
file.
3 To locate the directory in which the file to download resides, click Select
File.
4 Select the file to download in the File selection area and click OK.
By default, only downloadable files that are compatible with the current
storage array configuration are displayed.
When you select a file in the File selection area, applicable attributes (if
any) of the file are displayed in the NVSRAM File information area. The
attributes indicate the version of the NVSRAM file.
5 Click Transfer.
NOTE: If the file selected is not valid or is not compatible with the current
storage array configuration, the File Selection Error dialog is displayed. Click
OK to close it, and choose a compatible NVSRAM file.
6 Click Yes in the Confirm Download dialog.
The download starts.
book.book Page 211 Tuesday, June 18, 2013 3:09 PM