beautypg.com

Validate security key, Unlocking secure physical disks – Dell POWERVAULT MD3620I User Manual

Page 129

background image

Configuration: Disk Groups and Virtual Disks

129

4 In Confirm pass phrase, re-enter the exact string you entered in Pass

phrase.
Make a record of the pass phrase you entered. You need it for later secure

operations.

5 Click Save.
6 Make a record of the security key identifier and the file name from the

Save Security Key Complete dialog and click OK.

Validate Security Key

A file in which a security key is stored is validated through the Validate

Security Key dialog. To transfer, archive, or back up the security key, the RAID

controller module firmware encrypts (or wraps) the security key and stores it

in a file. You must provide a pass phrase and identify the corresponding file to

decrypt the file and recover the security key.
Data can be read from a security enabled physical disk only if a RAID

controller module in the storage array provides the correct security key. If

security enabled physical disks are moved from one storage array to another,

the appropriate security key must also be imported to the new storage array.

Otherwise, the data on the security enabled physical disks that were moved is

inaccessible.
For more information on validating the security key, see the PowerVault

Modular Disk Storage Manager online help topics.

Unlocking Secure Physical Disks

You can export a security enabled disk group to move the associated physical

disks to a different storage array. After you install those physical disks in the

new storage array, you must unlock the physical disks before data can be read

from or written to the physical disks. To unlock the physical disks, you must

supply the security key from the original storage array. The security key on the

new storage array is different and cannot unlock the physical disks.
You must supply the security key from a security key file that was saved on the

original storage array. You must provide the pass phrase that was used to

encrypt the security key file to extract the security key from this file.
For more information, see the PowerVault Modular Disk Storage Manager

online help topics.

book.book Page 129 Tuesday, June 18, 2013 3:09 PM

This manual is related to the following products: