Dell POWERVAULT MD3620I - Manual (Page 215)

Management: Firmware Downloads 213
12 Click OK.
The Confirm Download dialog is displayed.
13 Click Yes.
The download starts and a progress indicator is displayed in the Status
column of the Upgrade RAID Controller Module Firmware window.
Downloading Physical Disk Firmware
CAUTION: When updating physical disk firmware, you must stop all I/O activity to
the array to prevent data loss.
The physical disk firmware controls various features of the physical disk. The
disk array controller (DAC) uses this type of firmware. Physical disk firmware
stores information about the system configuration on an area of the physical
disk called DACstore. DACstore and the physical disk firmware enable easier
reconfiguration and migration of the physical disks. The physical disk
firmware performs these functions:
• The physical disk firmware records the location of the physical disk in an
expansion enclosure. If you take a physical disk out of an expansion
enclosure, you must insert it back into the same physical disk slot, or the
physical disk firmware cannot communicate with the RAID controller
module or other storage array components.
• RAID configuration information is stored in the physical disk firmware and
is used to communicate with other RAID components.
CAUTION: Risk of application errors—Downloading the firmware could cause
application errors.
Keep these important guidelines in mind when you download firmware to
avoid the risk of application errors:
• Downloading firmware incorrectly could result in damage to the physical
disks or loss of data. Perform downloads only under the guidance of your
Technical Support representative.
• Stop all I/O to the storage array before the download.
book.book Page 213 Tuesday, June 18, 2013 3:09 PM