Dell POWERVAULT MD3600F - Manual (Page 82)

82 Configuration: About Your Storage Array
The SMTP mail server is the name of the mail server that forwards the
alert e-mails to the configured e-mail addresses.
5 In E-mail sender address, type the valid sender e-mail address.
The e-mail address of the sender (the network administrator) is displayed
on each e-mail alert sent to the destination.
6 To include the contact information of the sender in the e-mail alert, select
Include contact information with the alerts, and type the contact
information.
NOTE: Including the contact information in the e-mail alert is optional.
7 Select the e-mail tab to configure the e-mail destinations.
• Adding an e-mail address—In e-mail address, type the e-mail address,
and click Add.
• Replacing an e-mail address—In the Configured E-mail addresses
area, select the e-mail address to be replaced, type the replacement e-
mail address in E-mail address, and click Replace.
• Deleting an e-mail address—In the Configured E-mail addresses area,
select the e-mail address, and click Delete.
• Validating an e-mail address—Type the e-mail address in E-mail
address or select the e-mail address in the Configured E-mail
addresses area, and click Test. A test e-mail is sent to the selected e-
mail address. A dialog with the results of the test and any error is
displayed.
8 For the selected e-mail address, in Information To Send, select:
• Event Only—The alert e-mail contains only the event information.
This alert type is the default.
• Event + Profile—The alert e-mail contains the event information and
the storage array profile.
• Event + Support—The alert e-mail contains the event information
and a compressed file that contains complete support information for
the storage array that has generated the alert.
book.book Page 82 Tuesday, June 18, 2013 3:03 PM