Dell POWERVAULT MD3600F - Manual (Page 140)

140 Configuration: Disk Groups and Virtual Disks
Using Unconfigured Capacity
You can increase the capacity of a standard virtual disk or a snapshot
repository virtual disk using the unconfigured capacity when no free capacity
exists on a disk group. An increase is achieved by adding unconfigured
capacity, in the form of unassigned physical disks to the disk group of the
standard virtual disk or the snapshot repository virtual disk. See "Disk Group
Expansion" on page 138.
For more information, see the PowerVault Modular Disk Storage Manager
online help topics.
Disk Group Migration
Disk group migration allows to you export a disk group so that you can import
the disk group to a different storage array. You can also export a disk group so
that you can store the data offline.
NOTE: During the export process (before the disk group is imported) you lose
access to the data on the exported disk group.
NOTE: You must export a disk group before you move the disk group or import the
disk group.
Export Disk Group
The export disk group operation prepares the physical disks in the disk group
for removal. You can remove the physical disks for offline storage, or you can
import the disk group to a different storage array. After you complete the
export disk group operation, all of the physical disks are offline. Any
associated virtual disks or free capacity nodes are no longer shown in MDSM.
Non-Exportable Components
You must remove or clear any non-exportable settings before you can
complete the export disk group procedure. Remove or clear the following
settings:
• Persistent reservations
• Host-to-virtual disk mappings
• Virtual disk copy pairs
• Snapshot virtual disks and snapshot repository virtual disks
• Remote replication pairs
• Replication repositories
book.book Page 140 Tuesday, June 18, 2013 3:03 PM