Dell POWERVAULT MD3600F - Manual (Page 231)

Management: Firmware Downloads 231
7 Click Transfer.
Keep these guidelines in mind:
• If the
Transfer button is inactive, ensure that you either select an
NVSRAM file or deselect the Transfer NVSRAM file with RAID
controller module firmware option.
• If the file selected is not valid or is not compatible with the current storage
array configuration, the File Selection Error dialog is displayed. Click OK
to close it, and choose a compatible firmware or NVSRAM file.
8 In the Confirm Download dialog, click Yes.
The download starts.
9 Perform one of these actions:
• Select Tools Upgrade RAID Controller Module Firmware.
• Select the Setup tab, and click Upgrade RAID Controller
Module Firmware.
10 In the Storage array pane, select the storage array for which you want to
upgrade the RAID controller module firmware or the NVSRAM.
You can select more than one storage array.
NOTE: The Details pane shows the details of only one storage array at a time.
If you select more than one storage array in the Storage Array pane, the
details of the storage arrays are not shown in the Details pane.
11 Click Firmware in the Download area.
If you select a storage array that cannot be upgraded, the Firmware button
is disabled.
The
Download Firmware dialog is displayed. The current firmware version
and the NVSRAM version of the selected storage arrays is displayed.
NOTE: If you select the storage arrays with different RAID controller module
types that cannot be updated with the same firmware or NVSRAM file and
click Firmware, the Incompatible RAID Controller Modules dialog is displayed.
Click OK to close the dialog and select the storage arrays with similar RAID
controller module types.
book.book Page 231 Tuesday, June 18, 2013 3:03 PM