Control panel, Removing the control panel – Dell POWERVAULT MD3600F User Manual
Page 259
Management: Installing Array Components
259
Figure 16-12. Securing the Power Cable
CAUTION:
When connecting the power cable, secure the cable with the velcro strap.
NOTE:
If the array is powered on, all the power supply LEDs remain off until the AC
power cable is connected to the power supply/cooling fan module and the power
switch is turned on.
4 Turn on the power supply/cooling fan module.
Control Panel
Removing the Control Panel
1 Turn off the array and host server.
2 Disconnect all the power cables connected to the array.
3 Remove the hard drives from:
–
slots 0 to 2 in PowerVault MD3600f
–
slots 0 to 5 in PowerVault MD3620f
See "Removing a Hard Drive" on page 244.
NOTE:
Mark each hard drive with it’s slot position as you remove it.
1
restraining strap
1
book.book Page 259 Tuesday, June 18, 2013 3:03 PM