Dell Open Manage Print Manager Software - Manual (Page 170)

170 Upgrade
Associating an Existing Firmware Tool
A firmware tool is used to upgrade the printer firmware. You can associate an existing firmware tool to a
printer model or modify the association of an existing firmware tool.
Before associating an existing firmware tool, all the firmware tools have to be copied in the tools folder.
By default curl tool is provided along with OMPM. OMPM also uses lpr tool which gets installed with
most windows Operating System (OS). The tools can even be added to the tools folder later.
NOTE: Only one firmware tool can be associated with one printer model.
To associate an existing firmware tool, perform the following steps:
1 In the navigation panel, click Manage  Upgrade.
Figure 12-1. Upgrade Window