Dell PowerVault TL4000 - Manual (Page 88)

2. For Error Log Mode, select Continuous so all information for logs and traces
will be captured.
3. Trace Level and Trace Filter options can be changed by Service personnel only.
4. Click one of the following:
v Refresh - to cancel all of your entries and leave the settings as they were.
v Submit - to apply the changes made to the screen.
Entering Email Notification Information using the Web User
Interface
This function is not available on the Operator Control Panel.
Use this menu item to set up email notification of library errors and warnings.
1.
Click Configure Library > Email Notification in the left navigation pane.
2. If you would like to be notified when an error occurs, select Notify Errors.
3. If you would like to be notified when a warning occurs, select Notify
Warnings
.
4. In To Email Address, enter the email address to which the information will be
sent.
5. In SMTP Server Address (IPv4 or IPv6), enter the IP Address of the SMTP
server associated with the email address.
6. Enter the Domain Name for your library. This field cannot be blank when
using event notification.
Figure 4-36. The Configure Library: Logs and Traces screen
a77ug0
6
5
Figure 4-37. The Configure Library: Email Notification screen
4-34 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide