Dell PowerVault TL4000 - Manual (Page 241)

Table A-4. 4U library SCSI element addresses for storage slots and drive slot (one logical partition with drives in slot
1 and slot 2) (continued)
Slot 18
4113
(0x1011)
Slot 19
4114
(0x1012)
Slot 20
4115
(0x1013)
Slot 21
4116
(0x1014)
Drive 2
257
(0x101)
Slot 45
4140
(0x102C)
Slot 44
4139
(0x102B)
Slot 43
4138
(0x102A)
Slot 42
4137
(0x1029)
Slot 14
4109
(0x100D)
Slot 15
4110
(0x100E)
Slot 16
4111
(0x100F)
Slot 17
4112
(0x1010)
Slot 41
4136
(0x1028)
Slot 40
4135
(0x1027)
Slot 39
4134
(0x1026)
Slot 38
4133
(0x1025)
Slot 10
4105
(0x1009)
Slot 11
4106
(0x100A)
Slot 12
4107
(0x100B)
Slot 13
4108
(0x100C)
Slot 37
4132
(0x1024)
Slot 36
4131
(0x1023)
Slot 35
4130
(0x1022)
Slot 34
4129
(0x1021)
Lower Left Magazine
Drive 1
256
(0x100)
Lower Right Magazine
I/O Slot 3
18
(0x12)
Slot 7
4102
(0x1006)
Slot 8
4103
(0x1007)
Slot 9
4104
(0x1008)
Slot 33
4128
(0x1020)
Slot 32
4127
(0x101F)
Slot 31
4126
(0x101E)
Slot 30
4125
(0x101D)
I/O Slot 2
17
(0x11)
Slot 4
4099
(0x1003)
Slot 5
4100
(0x1004)
Slot 6
4101
(0x1005)
Slot 29
4124
(0x101C
Slot 28
4123
(0x101B)
Slot 27
4122
(0x101A)
Slot 26
4121
(0x1019)
I/O Slot 1
16
(0x10)
Slot 1
4096
(0x1000)
Slot 2
4097
(0x1001)
Slot 3
4098
(0x1002)
Slot 25
4120
(0x1018)
Slot 24
4119
(0x1017)
Slot 23
4118
(0x1016)
Slot 22
4117
(0x1015)
Library Partitioning and Element Addressing
Library 4U systems with firmware versions of .80 and higher, and containing at
least 2 drives, have the ability to configure two logical libraries (create two
partitions). This partitioning has been expanded with the new library firmware and
half-high drive integration. Now it is possible to configure 1, 2, 3 or 4 partitions in
the 4U library. Additionally the 2U library can now be configured into one or two
partitions. Each library must contain at least one drive per logical library
(partition). In a partitioned library, the Operator Control Panel (OCP) only reports
the status of logical library 1 in the main menu due to space limitations. You must
navigate to the logical libraries status in the OCP to get the information on the
additional library partitions.
Partitioning of 2U Libraries
When two half height drives are installed in a 2U library, the library firmware will
support partitioning in the same way that the 4U supports partitioning with two
full height drives today. The first partition will contain the first magazine and the
first drive. The second partition will contain the second magazine and the second
drive. The I/O station (if configured as I/O) will be shared, as is done with the
partitioned 4U library.
One full height drive is "Drive 1". When using half height drives, the first half
height drive position will be called "Drive 1", The second half height drive position
will be called "Drive 2."
Partitioning of 4U Libraries
When one or more half height drives are added to a 4U library, the drive naming
will change. Currently, the first full height drive is "Drive 1" and the second full
height drive is "Drive 2". When you consider that each full height drive slot may
contain one or two half height drives, there are four potential drives in the space
Appendix A. SCSI Element Types, SCSI Addresses, and Physical Configurations A-3