Dell PowerVault TL4000 - Manual (Page 29)

Table 1-4. Library storage capacity and data transfer rate (continued)
Characteristic 2U Library Specification 4U Library Specification
Sustained native data transfer
rate LTO 3 HH: 60 MBs,
LTO 3 HH V2: 80 MBs
LTO 3 FH: 80 MBs
LTO 4 HH and FH: 120 MBs
LTO 5 : 140 MBs
LTO 6: 160 MBs
Ultrium Tape Drives
This library supports the Ultrium 3, 4, 5, and 6 Tape Drives. Each tape drive in the
library is packaged in a container called a drive sled. The drive sled is a customer
replaceable unit (CRU), and is designed for quick removal and replacement in the
library.
The Ultrium 6 Tape Drive supports two SAS SFF-8088 connectors, or one LC Fibre
Channel connector. The SFF-8088 SAS connectors on the Ultrium 6 tape drives are
compatible with SAS-1 or SAS-2 cables.
The Ultrium 5 Tape Drive supports two SAS SFF-8088 connectors, or one LC Fibre
Channel connector. The SFF-8088 SAS connectors on the Ultrium 5 tape drives are
compatible with SAS-1 or SAS-2 cables.
The Ultrium 4 Full Height Tape Drives support SAS, or Fibre Channel interfaces. It
features two SFF-8088 SAS connectors, or one LC Fibre Channel connector. The
Ultrium 4 Half Height Tape Drive supports one SAS SFF-8088 connector. The
Ultrium 4 Half High V2 Tape Drives support two SFF-8088 SAS connectors, or one
LC Fibre Channel connector. The SFF-8088 SAS connectors on the Ultrium 4 tape
drives are compatible with SAS-1 cables.
The Ultrium 3 Full Height Tape Drive supports LVD Ultra160, or Fibre Channel
interfaces. It features two HD68 connectors or one LC Fibre Channel connector. The
Ultrium 3 Half Height Drive supports one SAS SFF-8088 connector. The Ultrium 3
Half High V2 Tape Drive supports two SFF-8088 SAS connectors. The SFF-8088
SAS connectors on the Ultrium 3 tape drives are compatible with SAS-1 cables.
Chapter 1. Product Description 1-9