Dell PowerVault TL4000 - Manual (Page 86)

v Refresh - to cancel the changes made to the screen.
v Submit - to apply the changes made to the screen.
Note: Depending on the changes made, you will either be disconnected and
need to login again, or reboot the library. If a reboot is required, the
following Warning message will appear after the Submit button is
clicked.
The library must be rebooted or the changes will not take place.
Entering User Access Information using the Web User Interface
The Configure Library > User Access page is only accessible to the Admin and
Service login. Access is denied to User and Superuser logins.
The Admin login has access to all library functions except Service Library >
Advance Diagnostics
.
The Service login has access to all library functions including Service Library >
Advance Diagnostics
.
1. Click Configure Library > User Access in the left navigation pane.
2. Check the Disable Superuser checkbox to disable the Superuser role for this
library. Check the Disable User checkbox to disable the User role for this
library. Uncheck these boxes to allow these roles access to your library.
3. Choose a Role.
Note: Admin can select User, Superuser, and Admin roles. Service can select
User, Superuser, Admin, and Service roles.
Figure 4-33. Warning Screen
a77ug082
Figure 4-34. The Configure Library: User Access screen
4-32 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide