Monitor: inventory – Dell PowerVault TL4000 User Manual
Page 112
Under Status and Drive (n) are the following items:
v
Status - the current status of the drive
v
Activity - the current action being performed by the drive
v
Source - the serial number of the cartridge currently in the drive
v
Encryption - indicates the type of data encryption currently set for the selected
drive (will not appear on Gen3 or SCSI drives)
v
Topology - the topology chosen for a fibre library (see “Fibre Channel Interface”
on page 3-10)
v
Speed - indicates the speed of the fibre channel (fibre library)
v
Link - indicates the status of the fibre channel (fibre library)
v
Hashed Address - an address calculated from the WWID
Under Identity and Drive (n) are the following items:
v
Firmware Rev - the current level of drive firmware
v
Vendor ID - Dell
v
Product ID - drive inquiry string
v
Serial Number - the drive serial number
v
Version - Ultrium 3 and 4 half high SAS drives and Ultrium 4 Fibre Channel
drives may be listed as Version 2.
v
SCSI ID - the unique identifier assigned to a SCSI drive
v
WWNN - the fibre channel drive's World Wide Node Name
v
Topology - the topology chosen for the fibre channel drive
v
Speed - indicates the speed of the fibre channel tape drive
v
Loop ID - unique identifier assigned to a fibre channel tape drive
v
PID - port identification (SAS only)
Monitor: Inventory
This menu item displays the current library inventory of a 4U library.
5-14
Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide