Dell PowerVault TL4000 - Manual (Page 148)

Click one of the following:
v Refresh - to cancel the changes made to the screen.
v Submit - to apply the changes made to the screen.
Note: When configuration changes of a disabled drive are made from the Operator
Control Panel (OCP), the drive powers ON after committing changes. When
configuration changes of a disabled drive are made from the Web Interface
(RMU), the drive does not power ON after committing changes.
Configure Library: Network
This page shows the current network configuration of the library and allows
modification to the configuration. When a change is requested, a pop-up box
checks confirms the request.
1. Click Network in the left navigation pane, to display the Network page.
Important: Do not click the Submit button until all changes have been made
to the Network page. Once the Submit button has been clicked, no
other changes can be made until after the library has applied the
current changes.
a77ug095
Topology
FC-AL Loop ID
Figure 5-42. The Configure Library: Drives page for a 4U library
a77ug07
4
Figure 5-43. Configure Library: Network Page
5-50 Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide