Dell PowerVault TL4000 - Manual (Page 151)

Check the Disable User check box if you do not want User to be listed on the
Role
listbox (that is, prohibits User login). Clear the check box to allow
Superuser or User login.
Passwords
v Role - The name that is associated with the chosen Access Level. Choose from
User , Superuser, Admin, or Service.
Note: Admin can select User, Superuser, and Admin roles. Service can select
User, Superuser, Admin, and Service roles.
v New Password (Enter Up To Twenty Characters) - Enter a new password to be
associated with the Access Level Name.
v Repeat Password - Reenter the new password for verification purposes.
Support Contact
v Support Name - The name of the individual within your company to contact for
Web User Interface or library support.
Note: Only one support person is configured for the entire tape library. The
support person might or might not be one of the user, superuser, or
admin account holders.
v Support Phone - The phone number of the individual within your company to
contact for Web User Interface or library support.
v Support Email - The email address of the individual within your company to
contact for Web User Interface or library support.
Password Rules
v Minimum Number Of Characters - Choose the minimum password length. The
factory default value is 8. Possible range for this configuration option is 8 - 20.
The maximum password length is 20.
v Minimum Number Of Upper Case Alphabetic Characters (A-Z) - Choose the
minimum number of uppercase alphabetic characters. The factory default value
is 1. Possible range for this configuration option is 0 - 3.
v Minimum Number Of Lower Case Alphabetic Characters (a-z) - Choose the
minimum number of lowercase alphabetic characters. The factory default value
is 1. Possible range for this configuration option is 0 - 3.
v Minimum Number Of Numeric Characters (0-9) - Choose the minimum
number of numeric characters. The factory default value is 1. Possible range for
this configuration option is 0 - 3.
v Minimum Number Of Special Characters (!@#$%^&*()_+={}|[]\;':"<>?,./) -
Choose the minimum number of special characters. The factory default value is
0. Possible range for this configuration option is 0 - 3.
v Maximum Number Of Identical Consecutive Characters - Choose the
maximum number of identical consecutive characters. The factory default value
is 2. Possible range for this configuration option is 0 - 3. There is no limitation if
0 is selected.
v Maximum Number Of Failed Logins Before Password Is Locked - Choose the
maximum number of failed logins before the password is locked. The factory
default value is 5. Possible range for this configuration option is 0 - 10. There is
no limitation if 0 is selected.
Note: When a password is locked, the login cannot continue. First, you must
complete a valid login with an admin account where the admin can
Chapter 5. Operations 5-53