Bio-Rad Precision Melt Analysis™ Software - Manual (Page 58)

Precision Melt Analysis Software Instruction Manual
53
6 Melt Study Analysis
Read this chapter for information about performing melt study analysis in
Precision Melt Analysis
™
software.
• Melt Study window (below)
• Study Setup tab (page 54)
• Study Analysis tab (page 55)
• Melt Study report window (page 55)
Melt Study Window
Precision Melt Analysis software can compare melt curve data from different runs of the same
instrument using a single melt study. Create a Melt Study by adding data from one or more
melt files (.melt extension) to the Melt Study window. Precision Melt Analysis software groups
the data into a single melt study file (.mlts extension).
NOTE: The maximum number of samples that can be analyzed in a melt study is
limited by the size of the computer's RAM and virtual memory.
The Melt Study window includes two tabs. Figure 44 shows the Melt Study window with the
Study Setup and Study Analysis tabs.
• Study Setup tab. Click this tab to manage the experiments in the melt study file
NOTE: Adding or removing melt files in a Melt Study does not change the original
data in that file.
• Study Analysis tab. Click this tab to view the data for the combined experiments