Compaq Professional Workstation AP200 - Manual (Page 87)

4-23
Compaq Professional Workstation AP200 Reference Guide
Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003
File Name: E-CH04.DOC Last Saved On: 1/19/99 9:40 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Installing Additional Drives
The workstation supports up to five drives that can be installed in various
configurations.
When installing additional IDE drives, follow these guidelines:
■ For optimal performance, connect hard drives to the primary controller.
Connect expansion devices, such as IDE CD-ROM, tape, and diskette
drives to the secondary controller.
■ You may install either a third-height or a half-height drive into a half-
height bay.
■ You must install guide screws to ensure that the drive will line up
correctly in the drive cage. Compaq has provided extra guide screws,
installed in the front of the workstation chassis, behind the front bezel.
Some options use M3 metric hardware. Compaq-supplied metric screws
are black.
6-32
M3
Figure 4-15. Identifying the metric screws