Compaq Professional Workstation AP200 - Manual (Page 29)

2-7
Compaq Professional Workstation AP200 Reference Guide
Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003
File Name: C-CH02.DOC Last Saved On: 12/15/98 4:21 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Computer Setup Continued
Task Computer Setup Selection
Enable/disable timeouts or manually select
timeout values
NOTE: These selections appear only if
energy saver mode is set to Advanced.
Select Power, then select Timeouts.
Set the power button configuration (on/off or
suspend/wakeup) and enable/disable power
LED blink in suspend mode
NOTE: This selection does not appear if the
energy saver mode is disabled.
Select Power, then select Energy Saver
Options.
Enable the Power-On Password. For more
information, see the section “Security
Management” in Chapter 3. Select Security, then select Power-On
Password.
Enable/disable network server mode,
keyboard QuickLock screen when locked,
and/or QuickLock in energy saver mode. For
more information, see the section “Security
Management” in Chapter 3.
NOTE: This selection appears only if a
Power-On Password is set.
Select Security, then select Password
Options.
Enable the Setup (administrator) Password.
For more information, see the section
“Security Management” in Chapter 3. Select Security, then select Setup
Password.
Enable/disable serial, parallel, and USB ports
and audio security Select Security, then select Device
Security.
Set the Asset Tag. See Chapter 3 for more
information. Select Security, then select System IDs.
Set the keyboard locale setting (for example,
English or German) for the System ID entry.
Also allows setting of Chassis serial number
if current number is invalid. Select Security, then select System IDs.
Set the POST mode (QuickBoot) and
enable/disable POST messages Select Advanced, then select Power-On
Self Test.
Continued