Compaq Professional Workstation AP200 - Manual (Page 18)

1-6 Product Features
Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003
File Name: B-CH01.DOC Last Saved On: 1/19/99 9:34 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Drive Positions
3
5 4
2
1 5
4
3
2
1
Figure 1-3. Identifies drive positions
Table 1-3
Drive Positions
Identifiers Connector
1 and 2 Two 5.25-inch, half-height bays for optional drives
3 One 1.44-MB, 3.5-inch high-density diskette drive mounted in the 5.25-
inch, one-third height bay
4 and 5 Two 3.5-inch, one-third height bays for hard drives
NOTE: Drive bay numbers are stamped on the chassis, behind the front bezel.
To verify the type and size of the storage devices installed in your computer,
run Compaq Computer Setup. See Chapter 2, “Software,” for more information.