Compaq Professional Workstation AP200 - Manual (Page 33)

2-11
Compaq Professional Workstation AP200 Reference Guide
Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003
File Name: C-CH02.DOC Last Saved On: 12/15/98 4:21 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Information provided by INSPECT includes:
■ Contents of the operating system startup files
■ Current memory configuration
■ ROM versions
■ Type of processor and coprocessor
■ Diskette, CD-ROM, tape, or hard drives installed
■ Active printer and communications interfaces
■ Modem type installed
■ Graphics settings
NOTE: Categories or items of information displayed by View System
Information (INSPECT) are similar to, but may vary slightly from, those
available in Compaq Diagnostics for Windows NT.
For information on using INSPECT, see the section “Using Computer Checkup
(TEST) or View System Information (INSPECT)” in this chapter.
Using Computer Checkup (TEST) or View
System Information (INSPECT)
NOTE: Before you run Computer Checkup (TEST) or View System Information
(INSPECT), you must create a diagnostics diskette. Refer to the section
“Creating a Diagnostics Diskette” in this chapter
for instructions.
1. Restart your workstation from the diagnostics diskette you have created.
2. Press Enter to bypass the welcome screen.
3. Select either Computer Checkup (TEST) or View System Information
(INSPECT), then press the Enter key.
4. Follow the instructions on the screen. See the section below, “When
Running TEST,” for further instructions.
5. To exit either TEST or INSPECT, press the Esc key to reach the Exit
option, then press the Enter key.