Compaq Professional Workstation AP200 - Manual (Page 142)

E-2 Error Codes
Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003
File Name: L-APPE.DOC Last Saved On: 12/14/98 2:40 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Power-On Self Test Message Continued
Message Beeps* Probable Cause Recommended Action
162-System Options
Not Set
2S Configuration incorrect Run Computer Setup or
Windows NT utilities.
RTC (real-time clock) battery
may need to be replaced.
Battery life is approximately 5
years.
First reset the date and
time under Control Panel.
If the problem persists,
replace the RTC battery.
See Chapter 4,
“Hardware Upgrades,”
for instructions on
installing a new battery,
or contact your Compaq
Authorized Dealer or
Reseller for RTC battery
replacement.
CMOS jumper may not be
properly installed.
Follow Appendix G
instructions on clearing
configuration memory for
proper placement of the
CMOS jumper.
* L = Long, S = Short
Continued