Compaq Professional Workstation AP200 - Manual (Page 137)

C-2 Power Cord Requirements
Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003
File Name: J-APPC.DOC Last Saved On: 12/14/98 11:23 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Country-Specific Requirements
Use the following table to identify the appropriate accredited agency in your
country.
Table C-1
Power Cord Set Requirements - By Country
Country Accredited Agency Applicable Note Numbers
Australia EANSW 1
Austria OVE 1
Belgium CEBC 1
Canada CSA 2
Denmark DEMKO 1
Finland SETI 1
France UTE 1
Germany VDE 1
Italy IMQ 1
Japan JIS 3
Norway NEMKO 1
Sweden SEMKO 1
Switzerland SEV 1
United Kingdom BSI 1
United States UL 2
NOTES:
1. Flexible cords must be Type HO5VV-F, 3-conductor, 1.0 mm 2 conductor
size. Power cord set fittings (appliance coupler and wall plug) must bear the
certification mark of the agency responsible for evaluation in the country where it
will be used.
2. Flexible cords must be Type SVT or equivalent, No. 18 AWG, 3-conductor. Wall
plugs must be a two-pole grounding type with a NEMA 5-15P (15A, 125V).
3. The appliance coupler, flexible cord, and wall plug must bear a "T" mark and
registration number in accordance with the Japanese Dentori Law. Flexible cord
must be Type VCT or VCTF, 3-conductor, 1.0 mm
2 conductor size. Wall plugs
must be a two-pole grounding type with a Japanese Industrial Standard C8303
(7A, 125V) configuration.