Compaq Professional Workstation AP200 User Manual
Page 143
E-3
Compaq Professional Workstation AP200 Reference Guide
Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003
File Name: L-APPE.DOC Last Saved On: 12/14/98 2:40 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Power-On Self Test Message
Continued
Message
Beeps*
Probable Cause
Recommended Action
163-Time and Date Not
Set
2S
Invalid time or date in
configuration memory
Set the date and time
under Control Panel.
RTC (real-time clock) battery
may need to be replaced.
Battery life is approximately 5
years.
If the problem persists,
replace the RTC battery.
See Chapter 4,
“Hardware Upgrades,”
for instructions on
installing a new battery,
or contact your Compaq
Authorized Dealer or
Reseller for RTC battery
replacement.
CMOS jumper may not be
properly installed.
Follow Appendix G
instructions on clearing
configuration memory for
proper placement of the
CMOS jumper.
164-Memory Size
Error
2S
Memory configuration incorrect
Make sure your memory
module(s) (if any) are
installed properly.
* L = Long, S = Short
Continued