Compaq Professional Workstation AP200 - Manual (Page 67)

4-3
Compaq Professional Workstation AP200 Reference Guide
Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003
File Name: E-CH04.DOC Last Saved On: 1/19/99 9:40 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Installation Sequence
It is very important that you follow this sequence of steps to ensure the proper
installation of any optional equipment.
1. If the workstation is already on, turn it off and disconnect the power
cord from the wall outlet.
2. Disconnect the keyboard, monitor, network cable, and other external
equipment connected to the workstation.
WARNING: To reduce the risk of electrical shock, fire, or
damage to the equipment, do not plug
telecommunications/telephone connectors into the network
interface controller (NIC) receptacles.
WARNING: To reduce the risk of personal injury from hot
surfaces, allow the internal system components to cool before
touching.
CAUTION: Static electricity can damage the electronic
components of the workstation or optional equipment. Before
beginning these procedures, ensure that you are discharged of
static electricity by briefly touching a grounded metal object. See
Appendix B for more information.
3. Open the workstation by removing its access panel. See “Removing the
Workstation Access Panel” in this chapter for instructions.
4. Install any optional equipment. For instructions, see the applicable
sections of this chapter and the documentation provided with the
optional equipment.
5. Replace the workstation access panel.
6. Reconnect the keyboard, monitor, network cable, and other external
devices.
7. Reconnect the power cord to the wall outlet.
8. Turn on the monitor, workstation, and other external devices.
9. Reconfigure the workstation, if necessary. See the following section,
“When to Reconfigure the Workstation.”