Compaq Professional Workstation AP200 - Manual (Page 76)

4-12 Hardware Upgrades
Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003
File Name: E-CH04.DOC Last Saved On: 1/19/99 9:40 AM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
7. After placing the workstation in the minitower position, gently slide the
drives back into the bay.
Figure 4-8. Installing the drives
NOTE: When the drives are properly inserted, the drivelock will secure them.
NOTE: The diskette drive should always be placed in the bay nearest the
internal 3.5-inch drives in the minitower configuration for proper clearance
within the chassis.
CAUTION: The use of unnecessary force may result in damage
to the drives.
8. Reconnect the power and data cables to the drives as labeled.
9. Remove the subpanel as described in the section “Removing the Bezel
Blank” and reposition it with the bezel blank in the proper orientation
for the desktop configuration.