Compaq Professional Workstation AP200 - Manual (Page 122)

6-18 Troubleshooting
Writer: IM Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003
File Name: G-CH06.DOC Last Saved On: 12/15/98 4:26 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Solving Memory Problems
If you encounter memory problems, some common causes and solutions
are listed in the following table.
Table 6-8
Solving Memory Problems
Problem Cause Solution
System won't boot
or does not function
properly after
installing additional
memory modules.
Memory module is not
the correct type or
speed grade for the
system.
Replace the memorymodule with an
industry-standard, ECC,
unregistered, 168-pin synchronous
dynamic random access memory
(SDRAM) DIMM that meets the
following criteria:
■ System Bus
■ 100 MHz
Rated for 100 MHz or faster
operation
Has an access time (CLK to Q) of
6nS or less
Supports CAS latency 2 or 3
operation
Continued