Compaq diagnostics, Creating a diagnostics diskette, Compaq diagnostics -9 – Compaq Professional Workstation AP200 User Manual
Page 31: Creating a diagnostics diskette -9
2-9
Compaq Professional Workstation AP200 Reference Guide
Writer: M. Church Project: Compaq Professional Workstation AP200 Reference Guide Comments: 352620-003
File Name: C-CH02.DOC Last Saved On: 12/15/98 4:21 PM
COMPAQ CONFIDENTIAL - NEED TO KNOW REQUIRED
Compaq Diagnostics
Compaq diagnostics consist of the following software tools:
■
Computer Checkup (TEST)
■
View System Information (INSPECT)
■
Compaq Diagnostics for Windows NT
Computer Checkup (TEST) and View System Information (INSPECT) are
discussed in this chapter. Before you can use these tools, you must create a
diagnostics diskette. See the section “Creating a Diagnostics Diskette” in this
chapter for instructions. Compaq Diagnostics for Windows NT is discussed in
Chapter 3.
Creating a Diagnostics Diskette
To create a diagnostics diskette:
1. With Windows NT Workstation 4.0 installed and running, insert a blank,
formatted diskette into the diskette drive.
2. Insert the SmartStart for Workstations CD into the CD-ROM drive.
3. From the SmartStart for Workstations Home Page, click Manual System
Configuration.
4. Click
Install Optional Compaq Software.
5. Click
Create a Diagnostics Diskette.
6. Follow the instructions on the screen.