Banner EZ-SCREEN Low-Profile Safety Light Curtain Systems - Manual (Page 18)

16
P/N 133
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Overview
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
EZ-SCREEN LP
Instruction Manual
16
P/N 140044 rev. E
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Components and Specifications
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Components and Specifications
2.6 Literature
The following documentation is supplied with each EZ-SCREEN LP receiver. Additional
copies are available at no charge; contact the factory or visit www.bannerenginering.com .
Model Description
STP-13 14 mm test piece (14 mm resolution systems)
STP-17 34 mm test piece (14 mm resolution systems with 2-beam reduced resolution)
STP-16 25 mm test piece (25 mm resolution systems)
STP-18 65 mm test piece (25 mm resolution systems with 2-beam reduced resolution)
LPA-TP-1 Terminator plug, for SLPC... emitter or receiver (included with sensor)
DELPE-81D
Replacement for M12-terminated pigtail QD, as shipped with standard pigtail
QD models; 8-conductor cable, 22 AWG/ 0.33 mm²; 0.3 m (1') long; see Section
2.3 for other lengths
LPA-MBK-11
End-cap bracket kit (includes 2 end brackets and hardware; see Figure 2-1);
360° sensor rotation; 14 ga (1.9 mm) steel, black zinc plated; die-cast zinc end-
cap plate
. Includes 2 brackets and hardware.
LPA-MBK-12
Side-mount bracket kit (includes 1 bracket and hardware; see Figure 2-1);
+10°/ −30° sensor rotation; 14 ga (1.9 mm) steel, black zinc plated; die-cast
zinc clamp. Includes 1 bracket and hardware.
SMA-MBK-1 SSM mirror bracket kit. Includes 2 replacement brackets for one mirror.
2.5 Replacement Parts
Description Part #
EZ-SCREEN LP System Instruction Manual 140044
Checkout Procedure Card (Daily) – Stand-Alone Systems 140045
Checkout Procedure Card (Daily) – Cascaded Systems 140046
Checkout Procedure Card (Semi-Annual) 140047
EZ-SCREEN LP Bracket Supplement 147360
LPA-MBK-11
End-cap bracket
LPA-MBK-12
Side-mount bracket
(4) M10 Bolt
Pole
40 mm
(1.58") Square Useable
Stand
Height
127 mm
(5.0")
Base Plate Thickness
6.4 mm (0.25")
MSA Series Stands (Base Included)*
Stand
Model
Pole
Height
Useable Stand
Height
Overall Stand Height
MSA-S24-1 610 mm (24") 483 mm (19") 616 mm (24.25")
MSA-S42-1 1067 mm (42") 940 mm (37") 1073 mm (42.25")
MSA-S66-1 1676 mm (66") 1550 mm (61") 1682 mm (66.25")
MSA-S84-1 2134 mm (84") 2007 mm (79") 2140 mm (84.25")
MSA-S105-1 2667 mm (105”) 2667 mm (100”) 2673 mm (105.25”)
* Available without a base by adding the suffix “NB” to model number, e.g., MSA-S42-1NB.