Banner EZ-SCREEN Low-Profile Safety Light Curtain Systems - Manual (Page 14)

12
P/N 13348
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Overview
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
EZ-SCREEN LP
Instruction Manual
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Components and Specifications
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Components and Specifications
Muting Modules
Provide muting capability for the EZ-SCREEN LP. See Banner manuals p/n 63517 or 116390
for further information and additional cabling options.
MMD-TA-11B
DIN-mount
Muting module
2 NO safety outputs (6 amps), 2 or 4 muting inputs, SSI,
override input; IP20; terminal connections
MMD-TA-12B
2 OSSD (0.5 amps), 2 or 4 muting inputs, SSI, override input;
IP20; terminal connections
MM-TA-12B Muting module
2 OSSD (0.5 amps), 2 or 4 muting inputs, USSI, override
input; IP65; QD connections, see below
DESE4-508D
DESE4-515D
DESE4-525D 2.5 m (8’) cable
5 m (15’) cable
8 m (25’) cable
Cordset to interface EZ-SCREEN LP Receiver with MM-TA-
12B Muting Module – 22 Ga, 8-pin Euro-style (M12) female
connector to 7-pin Mini-style male connector; double-ended.
NOTE: DELPE-8..D cordsets required on RD-interconnect
sensor models, or DEE2R-8..D cordsets on pigtail
interconnect models.
SC22-3(E) Safety Controller
Provide monitoring of multiple safety devices via 22 configurable inputs to control three
pairs of OSSD safety outputs. Other options available (e.g., EtherNet communications); see
Banner manual p/n 133487.
SC22-3-S Screw-type terminals
10 Auxiliary outputs, includes external memory XM
card
SC22-3-C Clamp-type terminals
SC22-3E-S Screw-type terminals 10 Auxiliary outputs, includes external memory XM
card, plus EtherNet/IP and Modbus TCP, 32 virtual
outputs
SC22-3E-C Clamp-type terminals
Remote Blanking Key Switch Box
Used to configure fixed blanking remotely on cascadeable model receivers (when used as a
standalone sensor pair, or the last receiver in a cascade). Use with DELPEF-8..D cordset to
interface with receiver cascade end and DEE2R-8..D cordset to provide required extension,
as needed.
EZA-RBK-1
Remote Blanking Key
Switch Allows the frequent configuration of a fixed blanked
area, without using the receiver DIP switches
External Keyed Reset Switches
EZA-RR-1
External normally open reset switch with 8-pin M12/Euro-style QD; can be
interconnected using cordset models QDE-8..D, DEE2R-8..D, or
CSB-..M1281.
MGA-KSO-1 Panel-mount keyed normally open reset switch
MGA-K-1 Replacement key for switch MGA-KSO-1