Banner EZ-SCREEN Low-Profile Safety Light Curtain Systems - Manual (Page 13)

Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Overview
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
EZ-SCREEN LP
Instruction Manual
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Banner Engineering Corp. • Minneapolis, U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Components and Specifications
2.4 Accessories
Additional interfacing solutions and accessories continue to be added; refer to
www.bannerengineering.com for a current list.
Interface Modules
Provide forced-guided, mechanically-linked relay (safety) outputs for the EZ-SCREEN LP.
See Banner data sheet p/n 62822 and Figure 3-26 for more information.
Contactors
The N.C. contacts are to be used in an external device monitoring (EDM) circuit. If used,
two contactors per EZ-SCREEN LP system are required. (See Figure 3-21.) See data
sheet p/n 111880 for additional options and more information.
Interface module (3 N.O. redundant-output 6 amp contacts) IM-T-9A
Interface module (2 N.O. redundant-output 6 amp contacts, plus 1 N.C.
auxiliary contact)
IM-T-11A
10 amp positive-guided contactor (3 N.O., 1 N.C.) 11-BG00-31-D-024
18 amp positive-guided contactor (3 N.O., 1 N.C.) BF1801L024
Model Connection
PMEF-810D
8-pin Euro-style female connector
3 m (10') wires, cut to length (Banner color code); 22 AWG/0.33 mm².
Emitter/Receiver Boxes
Model Outputs EDM
Emitter/Receiver
Connection
AC Power
Connection
Output and EDM
Connections
EZAC-R9-QE8 3 N.O. Selectable
1- or 2-Channel
or no EDM
8-Pin M12
Euro-style QD
Hard-wired Hard-wired
EZAC-R11-QE8 2 N.O., 1 N.C.
EZAC-R15A-QE8-QS83
1 N.O. + 1 SPDT
(Form C)
1-Channel
3-pin
Mini-style QD
8-pin
Mini-style QD
EZAC-R8N-QE8-QS53 1 N.O., 1 N.C.
Power
Monitoring
3-pin
Mini-style QD
5-pin
Mini-style QD
EZAC-R10N-QE8-QS53 2 N.O.
Emitter-Only Boxes
Model For Emitter Models Emitter Connection AC Power Connection
EZAC-E-QE8 SLPE..-..Q8 8-Pin M12 Euro-style QD Hard-wired
EZAC-E-QE8-QS3 SLPE..-..Q8 8-Pin M12 Euro-style QD 3-Pin Mini-style QD
AC Boxes
AC power supply for use with EZ-SCREEN LP emitters and/or receivers. Models
EZAC-R.. can be interfaced with up to three receivers or two cascaded emitter/receiver
pairs; models EZAC-E.. can power up to four emitters.
Box supplies +24V dc power @ 0.7 amps (16.8 W max. power); accepts input voltages
from 100-250V ac (50-60 Hz); IP65 metal housing. Models available with external device
monitoring (EDM); key reset switch on EZAC-R.. models (Emitter/Receiver models). See
data sheet p/n 120321 for more information.
3 m
(9.8')
21.5 mm
(0.85")
13.0 mm
(0.51")
M12 x 1
O-Ring
1/4-18NPT
ø 18.0 mm
(0.71")
7.0 mm
(0.28")
Bulkhead Connector
Connector for panel connection of EZ-SCREEN LP emitter and receiver cables.