Banner PresencePLUS P4 GEO 1.3 Series - Manual (Page 233)

14
Backing Up and Restoring Vision Sensor Data
14.1 Backing up Vision Sensor Data
To back up Vision sensor data:
1. Insert the PresencePLUS installation CD into the CD-ROM drive, and launch the install program.
2. Click on PresencePLUS Update Firmware.
3. From the list of sensors in the PresencePLUS Firmware Updater, select the sensor you want
to back up, and click Connect.
233 Banner Engineering Corp. - Minneapolis, MN USA - www.bannerengineering.com
Tel: 763.544.3164
P/N 000000