Metrohm 757 VA Computrace - Manual (Page 70)

4 Exploratory mode
757 VA Computrace – Software
60
4.3 Exploratory curves
Exploratory curves window
The EXPLORATORY CURVES window shows all curves of the sig-
nals loaded and (if a voltage sweep is running) the live curve.
If a signal file is loaded or measured, the axes have the following
orientation:
x axis
The previously loaded or measured signal is dis-
played from the left to the right. For cyclic
sweeps, the forward sweep is displayed from the
left to the right.
y axis The y axis is always displayed with positive val-
ues at the top and negative values at the bottom.
Load signal curves
The signal curves are loaded into the EXPLORATORY CURVES
window by loading the signal files (
*.sig
) in the
EXPLORATORY
SPECIFICATION window.
EXPLORATORY SPECIFICATION / File / Load signal
Load one or several (Ctrl + Click) existing signal
file(s) with its measurement parameters. Nor-
mally, signal files are stored in the
Data
folder.