Edit determination method parameters, Specifications – Metrohm 757 VA Computrace User Manual

Page 106

5 Determination mode

757 VA Computrace – Software

Edit determination method parameters

DETERMINATION CURVES

/ Edit /

Determination method parameters

Open the

EDIT DETERMINATION METHOD PARA-

METERS

window for viewing and modifying the

parameters of the determination method used to
record the determination. This window contains
the tabs

Specifications

Determination

Voltammet-

ric

Substances

and

Calculations

. If parameters in

the

EDIT DETERMINATION METHOD PARAMETERS

window are changed and

is pressed, the

determination will be recalculated automatically.

Note: These parameters will not automatically be used for the
next measurement. To do this, use the

Copy parameters to working

method

command (see section 5.3).

Specifications

The

Specifications

tab of the

EDIT DETERMINATION METHOD

PARAMETERS

window contains the main specifications of the de-

termination method. Only

Title

Remark1

and

Remark2

can be ed-

ited.