Metrohm 757 VA Computrace - Manual (Page 32)

2 Main window
757 VA Computrace – Software
22
Hardware settings
MAIN WINDOW / Settings / General Settings
In the GENERAL SETTINGS window default set-
tings for the add-on board, the VA Computrace
Interface and the Dosimats can be defined with
the
Hardware tab.
Interface
Selection of the interface used to operate the 757
VA Computrace:
ISA Card (IF020)
3.757.1300 Add-on board
VA Computrace Interface
6.2155.000 VA Computrace Interface
IF020 address
IP address of the add-on board.
I/O Mode
Input/Output transfer mode for add-on board.
The default setting is
Words (16-bit communica-
tion). If the add-on board does not work, use the
Bytes (8-bit communication) setting.
Dosimat
Settings for the 665 or 765 Dosimats connected
to the remote interface of the 757 VA Com-
putrace Stand (details see section 1.3).