Metrohm 757 VA Computrace - Manual (Page 66)

4 Exploratory mode
757 VA Computrace – Software
56
4.2 Exploratory specification window
Exploratory specification settings
The EXPLORATORY SPECIFICATION window contains all settings
for performing measurements in the exploratory mode. Most of
the settings are identical for exploratory and determination mode
and are therefore described in section 3.
Electrode see Electrodes, section 3.1
Drop size see Electrodes, section 3.1
Stirrer see Stirring, section 3.4
see Potentiostat, section 3.3
Initial purging time see Purging, section 3.4
Conditioning cycles see Conditioning, section 3.4
Pretreatment see Pretreatment, section 3.4