Metrohm 757 VA Computrace - Manual (Page 22)

2 Main window
757 VA Computrace – Software
12
Main window icons
It depends on the selected mode (exploratory or determination)
whether the following icons are displayed in the
MAIN WINDOW or
not.
Exit the VA Computrace 2.0 program.
Print reports and curves.
Switch to exploratory mode.
Switch to determination mode.
Load default parameters for exploratory or determination
mode.
Load existing method or signal file.
Save method or signal file.
Load existing determination file.
Save determination file.
Manual control of 757 VA Computrace Stand.
Manual control of Dosimats connected to the 757 VA
Computrace Stand.
Open or close WORKING METHOD SPECIFICATIONS or EX-
PLORATORY SPECIFICATION window.
Open or close DETERMINATION CURVES window.
Open or close MONITOR window for determinations.
Open or close EXPLORATORY CURVES window.
Open or close RESULTS window for determinations.
Open or close SAMPLE TABLE window.
Start measurement.
Stop measurement.
Hold measurement.
Continue measurement.
Go to next step in operation sequence.