Metrohm 757 VA Computrace - Manual (Page 102)

5 Determination mode
757 VA Computrace – Software
92
MANUAL ADDITION
This window appears at the start of each manual
addition of standard solutions for standard addi-
tion determinations or the recording of calibration
curves.
Add (from solution no. X) (ml) [ > 0.01 ml ; 0 ml ]
The addition volume for the manual addition de-
fined in the
Substances tab is displayed and can
be changed if desired. Add the addition solution
into the measuring vessel and press
.
BATCH SOLUTION EXCHANGE
This window appears if the Batch with solution ex-
change option is selected for the measurement
technique. The number of the solution to be
placed and the substances and their concentra-
tion defined in the
Substances tab are displayed.
Add this solution into the measuring vessel and
press
.
END OF DETERMINATION
This window appears at the end of the
determination. By pressing
, the
determination is automatically saved if the Auto
save determination and signal option is enabled in
the General tab of the GENERAL SETTINGS
window. The report elements checked in the
Documentation tab are automatically printed out.