Metrohm 784 KFP Titrino - Manual (Page 67)

3.2 Remote control commands
784 KFP Titrino
64
&Setup
Object Description Input range Reference
& Root
:
à Setup Settings for the operating mode
à .Comport Output of automatic info 1,2,1&2 3.2.2.82.
à .Keycode Send key code ON, OFF 3.2.2.83.
à .Tree Sending format of path info
³ Ã .Short Short format of path ON, OFF 3.2.2.84.
³ Ã .ChangedOnly Paths of modified nodes only ON, OFF ditto
³
à .Trace Message on changed values ON, OFF 3.2.2.85.
³
à .Lock Lock key functions
³ Ã .Keyboard Lock all keyboard keys ON, OFF 3.2.2.86.
³ Ã .Config Lock key ON, OFF ditto
³ Ã .Parameter Lock key ON, OFF ditto
³ Ã .SmplData Lock key ON, OFF ditto
³ Ã .UserMeth Lock functions
³ ³ Ã .Recall Lock “loading” ON, OFF ditto
³ ³ Ã .Store Lock “saving” ON, OFF ditto
³ ³ Ã .Delete Lock “deletion” ON, OFF ditto
³ À .Display Lock display function ON, OFF ditto
³
à .Mode Setting waiting intervals
³ Ã .StartWait Waiting time after start ON, OFF 3.2.2.87.
³ Ã .FinWait Waiting time after run ON, OFF ditto
³
à .SendMeas Automatic sending of measured values
³ Ã .SendStatus Connect/disconnect sending ON, OFF 3.2.2.88.
³ Ã .Interval Time interval 0.08...4...16200, ditto
³ MPList
³ Ã .Select Selection Assembly, Titrator 3.2.2.89.
³ Ã .Assembly From assembly
³ ³ Ã .CyclNo Cycle number ON, OFF 3.2.2.90.
³ ³ Ã .V Volume ON, OFF ditto
³ ³ Ã .Meas Measured indicator voltage ON, OFF ditto
³ Ã .Titrator From Titrator
³ ³ Ã .CyclNo Cycle number ON, OFF 3.2.2.91.
³ ³ Ã .V Volume ON, OFF ditto
³ ³ Ã .Meas Measured indicator voltage ON, OFF ditto
³ ³ Ã .dVdt Volume drift dV/dt ON, OFF ditto
³ ³ Ã .dMeasdt Measured value drift ON, OFF ditto
³ ³ Ã .dMeasdV 1st deviation of titration curve ON, OFF ditto
³